(see submission instructions below)

*(click your browser's refresh button to ensure that you
have the most recent version)*

Code for all programming assignments should be **well
documented**. A working program with no comments will **receive
only partial credit**. Documentation entails writing a description
of each function/method, class/structure, as well as comments throughout
the code to explain the program logic. Comments in OCaml are enclosed
within (* *), and may be nested.
It is understood that some of the exercises in this programming assignment
require extremely little code and will not require extensive comments.

While few programming assignments pretend to mimic the "real"
world, they may, nevertheless, contain some of the ambiguity that exists
outside the classroom. If, for example, an assignment is amenable to
differing interpretations, such that more than one algorithm may implement
a correct solution to the assignment, it is incumbent upon the
programmer to document not only the functionality of the algorithm (and
more broadly his/her interpretation of the program requirements), but to
articulate **clearly** the reasoning behind a particular choice of
solution.

The overall objective of this assignment is to expose you to some advanced features of OCaml such as higher-order functions, abstract datatypes and modules, as well as to fully understand the notion of scoping, binding, environments and closures, by implementing a mini-ML interpreter. In addition, in this assignment you will be building a lexer and a parser. Again, no individual function requires more than 15-25 lines, so if you're answer is longer, you can be sure that you need to rethink your solution. The template for the assignment, as well as several test cases is available as a zip file pa4.zip that you need to download.

**Note:** All the solutions can be done using the purely
functional fragment of OCaml, using constructs covered in class, and most
require the use of *recursion*.
Solutions using imperative features
such as references or while loops will receive **no credit**. Feel free
to use any library functions that you want.

Your functions/programs **must** compile and/or run on a **Linux** ACS machine (e.g. ` ieng6.ucsd.edu `,
as this is where the verification of your solutions will occur. While
you may develop your code on any system, ensure that your code runs as
expected on an ACS machine prior to submission.
You should test your code in the directories from
which the zip files (see below) will be created, as this will approximate the
environment used for grading the assignment.

Most of the points, except those for comments and style, will be **awarded
automatically, by evaluating your functions against a given test suite**.
In the `tests` directory, there is a small handful of tests. For this project, you will use `make` to compile your program.
If for some problem, you cannot get the code to compile, leave it as is with the
`raise ...`, with your partial solution enclosed below as a comment.
** There will be no exceptions to this rule**.
If the code you submit does not compile with make, you will receive 0 for the assignment.

Your solutions to this assignment will be stored in separate files under a directory called

solution/, inside which you will place the files :config.make,main.ml,Makefile,nanoLex.mll,nano.ml,nanoParse.mly,rules.make,test.ml,toplevel.mland there should beno other files in the directory.After creating and populating the directory as described above, create a zip file called

<LastName>_<FirstName>_cse130_pa4.zipby going into the directorysolutionand executing the UNIX shell command:

You can refer to an example submission file to compare with yours. Make sure that your zipped file's structure is the same as the example.zip <LastName>_<FirstName>_cse130_pa4.zip *

Once you've created the zip file with your solutions, you will use the

validate_pa4program to see whether your zip file's structure is well-formed to be inspected by our grading system by executing the UNIX shell command:

Thevalidate_pa4 <LastName>_<FirstName>_cse130_pa4.zipvalidate_pa4program will outputOKif your zip file is well-formed and your solution is compiled. Otherwise, it will output some error messages. Before going to step 3, make sure that your zip file passesvalidate_pa4program.Otherwise you get a zero for the whole assignment.If you have any trouble with this, refer to the instructions in step 1.

Once your zip file passes the validation check by

validate_pa4, you will use theturninprogram to submit this file for grading by going into the directorysolution/and executing the UNIX shell command:

turnin -c cs130w -p pa4 <LastName>_<FirstName>_cse130_pa4.zipThe

turninprogram will provide you with a confirmation of the submission process; make sure that the size of the file indicated byturninmatches the size of your tar file. See the ACS Web page onturninfor more information on the operation of the program.

type binop =
Plus
| Minus
| Mul
| Div
| Eq (* = *)
| Ne (* <> *)
| Lt (* < *)
| Le (* <= *)
| And
| Or
| Cons
(* data types for Expressions in nano-ml *)
type expr =
Const of int
| True
| False
| NilExpr
| Var of string
| Bin of expr * binop * expr
| If of expr * expr * expr
| Let of string * expr * expr (* let X = E1 in E2 -> Let (X,E1,E2) *)
| App of expr * expr (* F X -> App(F,X) -- (calling function F w/ argument X) *)
| Fun of string * expr (* fun X -> E -> Fun(X,E) *)
| Letrec of string * expr * expr (* let rec X = E1 in E2 -> Letrec (X,E1,E2) *)
(* data types for Values in nano-ml *)
type value =
Int of int
| Bool of bool
| Closure of env * string option * string * expr (* Closure(environment,Some name_of_function (* or None if anonymous *),formal,body) *)
| Nil
| Pair of value * value
and env = (string * value) list

The goal of this problem is to write a parser and lexer for nano-ml using mlyacc.

In each subproblem, we will increase the complexity of the expressions parsed by your program.

We will begin by making our parser recognize some of the simplest ML expressions: constants and variables.

Begin with `nanoParse.mly` and define tokens `TRUE`, `FALSE`, and `Id` (note that a token `Num` is already defined). An `Id` token should have a single agrument of a string, which will store the name of the variable.

Next add rules to `nanoLex.mll`. A `Num` constant is a sequence of one or more digits. An `Id` is a letter (capital or lowercase) followed by zero or more letters or digits. The strings "true" and "false" should return the corresponding tokens.

Finally, add a rule to `nanoLex.mll` to ignore whitespace: space, newline (\n), carriage return (\r), and tab (\t)

Once you have implemented this functionality, you should get the following behavior (`$` is a shell prompt, `#` is a nanoml.top prompt)

$ make

output from make, hopefully with no errors

$ ./nanoml.top

NanoML

$ ./nanoml.top

Objective Caml version 3.10.0

# NanoLex.token (Lexing.from_string "true");;

- : NanoParse.token = NanoParse.TRUE

# Main.token_list_of_string "true false 12345 foo bar baz";;

- : NanoParse.token list = [NanoParse.TRUE; NanoParse.FALSE; NanoParse.Num 12345; NanoParse.Id "foo"; NanoParse.Id "bar"; NanoParse.Id "baz"]

Now return to `nanoParse.mly`. Add rules to the parser so that true, false, integers, and ids are parsed into expressions (of type `Nano.expr` from `nano.ml`).

Once you have implemented this functionality, you should get the following behavior (`$` is a shell prompt, `#` is a nanoml.top prompt)

$ make

output from make, hopefully with no errors

$ ./nanoml.top

NanoML

$ ./nanoml.top

Objective Caml version 3.10.0

# NanoParse.exp NanoLex.token (Lexing.from_string "true");;

- : Nano.expr = Nano.True

# NanoParse.exp NanoLex.token (Lexing.from_string "false");;

- : Nano.expr = Nano.False

# NanoParse.exp NanoLex.token (Lexing.from_string " \n123");;

- : Nano.expr = Nano.Const 123

# NanoParse.exp NanoLex.token (Lexing.from_string "\rfoo");;

- : Nano.expr = Nano.Var "foo"

Add the following tokens to the lexer and parser.

These should be parsed as in real ML to give

String Token letLETrecREC=EQinINfunFUN->ARROWifIFthenTHENelseELSE

Once you have implemented this functionality and recompiled, you should get the following behavior at the `./nanoml.top` prompt:

# Main.token_list_of_string "let rec foo = fun x -> if y then z else w in foo";;

- : NanoParse.token list = [NanoParse.LET; NanoParse.REC; NanoParse.Id "foo"; NanoParse.EQ; NanoParse.FUN; NanoParse.Id "x"; NanoParse.ARROW; NanoParse.IF; NanoParse.Id "y"; NanoParse.THEN; NanoParse.Id "z"; NanoParse.ELSE; NanoParse.Id "w"; NanoParse.IN; NanoParse.Id "foo"]

# Main.string_to_expr "let rec foo = fun x -> if y then z else w in foo";;

- : Nano.expr = Nano.Letrec ("foo", Nano.Fun ("x", Nano.If (Nano.Var "y", Nano.Var "z", Nano.Var "w")), Nano.Var "foo")

Add the following tokens to the lexer and parser.

Add all of these as binary operators to your parser. Each should result in a

String Token +PLUS-MINUS*MUL/DIV<LT<=LE!=NE&&AND||OR

Once you have implemented this functionality and recompiled, you should get the following behavior at the `./nanoml.top` prompt:

# Main.token_list_of_string "+ - /*|| <<= &&!=";;

- : NanoParse.token list = [NanoParse.PLUS; NanoParse.MINUS; NanoParse.DIV; NanoParse.MUL; NanoParse.OR; NanoParse.LT; NanoParse.LE; NanoParse.AND; NanoParse.NE]

# Main.string_to_expr "x + y";;

- : Nano.expr = Nano.Bin (Nano.Var "x", Nano.Plus, Nano.Var "y")

# Main.string_to_expr "if x < 4 then a || b else a && b";;

- : Nano.expr = Nano.If (Nano.Bin (Nano.Var "x", Nano.Lt, Nano.Const 4),

Nano.Bin (Nano.Var "a", Nano.Or, Nano.Var "b"),

Nano.Bin (Nano.Var "a", Nano.And, Nano.Var "b"))

# Main.string_to_expr "if 4 <= z then 1-z else 4*z";;

- : Nano.expr = Nano.If (Nano.Bin (Nano.Const 4, Nano.Le, Nano.Var "z"),

Nano.Bin (Nano.Const 1, Nano.Minus, Nano.Var "z"),

Nano.Bin (Nano.Const 4, Nano.Mul, Nano.Var "z"))

# Main.string_to_expr "let a = 6 / 2 in a!=11";;

- : Nano.expr = Nano.Let ("a", Nano.Bin (Nano.Const 6, Nano.Div, Nano.Const 2),

Nano.Bin (Nano.Var "a", Nano.Ne, Nano.Const 11))

Add the following tokens to the lexer and parser.

Add rules to your parser to allow parenthesized expressions. In addition, add a rule to your parser for function application. Function application is simply "<expr

String Token (LPAREN)RPAREN

Once you have implemented this functionality and recompiled, you should get the following behavior at the `./nanoml.top` prompt:

# Main.token_list_of_string "() ( )";;

- : NanoParse.token list = [NanoParse.LPAREN; NanoParse.RPAREN; NanoParse.LPAREN; NanoParse.RPAREN]

# Main.string_to_expr "f x";;

- : Nano.expr = Nano.App (Nano.Var "f", Nano.Var "x")

# Main.string_to_expr "(fun x -> x+x) (3*3)";;

- : Nano.expr = Nano.App (Nano.Fun ("x", Nano.Bin (Nano.Var "x", Nano.Plus, Nano.Var "x")),

Nano.Bin (Nano.Const 3, Nano.Mul, Nano.Const 3))

# Main.string_to_expr "(((add3 (x)) y) z)";;

- : Nano.expr = Nano.App (Nano.App (Nano.App (Nano.Var "add3", Nano.Var "x"), Nano.Var "y"), Nano.Var "z")

# Main.filename_to_expr "tests/t1.ml";;

- : Nano.expr = Nano.Bin (Nano.Bin (Nano.Const 2, Nano.Plus, Nano.Const 3), Nano.Mul,

Nano.Bin (Nano.Const 4, Nano.Plus, Nano.Const 5))

# Main.filename_to_expr "tests/t2.ml";;

- : Nano.expr = Nano.Let ("z1", Nano.Const 4, Nano.Let ("z", Nano.Const 3,

Nano.Let ("y", Nano.Const 2, Nano.Let ("x", Nano.Const 1, Nano.Let ("z1", Nano.Const 0,

Nano.Bin (Nano.Bin (Nano.Var "x", Nano.Plus, Nano.Var "y"), Nano.Minus, Nano.Bin (Nano.Var "z", Nano.Plus, Nano.Var "z1")))))))

Operators Associativity High Precedencefunction application left *,/left +,-left =,!=,<,<=left &&left ||left let,fun,ifN/A Low Precedence

Left associative means that "1-2-3-4" should be parsed as if it were "((1-2)-3)-4", and "f x y z" should be parsed as if it were "((f x) y) z".

Function application having higher precedence than multiplications, and multiplication higher than addition means that "1+f x*3" should be parsed as if it were "1+((f x)*3)"

`./nanoml.top` prompt:

# Main.string_to_expr "1-2-3-4";;

- : Nano.expr = Nano.Bin (Nano.Bin (Nano.Bin (Nano.Const 1, Nano.Minus, Nano.Const 2), Nano.Minus, Nano.Const 3), Nano.Minus, Nano.Const 4)

# Main.string_to_expr "1+a&&b||c+d*e-f/g x";;

- : Nano.expr = Nano.Bin (Nano.Bin (Nano.Bin (Nano.Const 1, Nano.Plus, Nano.Var "a"), Nano.And, Nano.Var "b"), Nano.Or, Nano.Bin (Nano.Bin (Nano.Var "c", Nano.Plus, Nano.Bin (Nano.Var "d", Nano.Mul, Nano.Var "e")), Nano.Minus, Nano.Bin (Nano.Var "f", Nano.Div, Nano.App (Nano.Var "g", Nano.Var "x"))))

# Main.filename_to_expr "tests/t13.ml";;

- : Nano.expr = Nano.Let ("f", Nano.Fun ("x", Nano.Fun ("y", Nano.Fun ("a",

Nano.Bin (Nano.App (Nano.Var "a", Nano.Var "x"), Nano.Mul, Nano.Var "y")))),

Nano.Let ("g", Nano.Fun ("x", Nano.Bin (Nano.Var "x", Nano.Plus, Nano.Bin (Nano.Const 1, Nano.Mul, Nano.Const 3))),

Nano.App (Nano.App (Nano.App (Nano.Var "f", Nano.Const 7), Nano.Const 8), Nano.Var "g")))

Add the following tokens to the lexer and parser.

Add rules to your lexer and parser to support parsing lists. "[a;b;c;d;e;f;g]" should be parsed as if it were "a::b::c::d::e::f::g::[]". The :: operator should have higher priority than the comparison functions (=, <=, etc.), and lower priority than + and -. In addition, :: should be right associative. [] should give

String Token [LBRAC]RBRAC;SEMI::COLONCOLON

`./nanoml.top` prompt:

# Main.string_to_expr "1::3::5::[]";;

- : Nano.expr = Nano.Bin (Nano.Const 1, Nano.Cons, Nano.Bin (Nano.Const 3, Nano.Cons, Nano.Bin (Nano.Const 5, Nano.Cons, Nano.NilExpr)))

# Main.string_to_expr "[1;3;5]";;

- : Nano.expr = Nano.Bin (Nano.Const 1, Nano.Cons, Nano.Bin (Nano.Const 3, Nano.Cons, Nano.Bin (Nano.Const 5, Nano.Cons, Nano.NilExpr)))

# Main.string_to_expr "1::3::5::[]=[1;3;5]";;

- : Nano.expr =

Nano.Bin (Nano.Bin (Nano.Const 1, Nano.Cons, Nano.Bin (Nano.Const 3, Nano.Cons, Nano.Bin (Nano.Const 5, Nano.Cons, Nano.NilExpr))),

Nano.Eq, Nano.Bin (Nano.Const 1, Nano.Cons, Nano.Bin (Nano.Const 3, Nano.Cons, Nano.Bin (Nano.Const 5, Nano.Cons, Nano.NilExpr))))

```
``` type binop = Plus | Minus | Mul | Div
type expr = Const of int
| Var of string
| Bin of expr * binop * expr
type value = Int of int
type env = (string * value) list

First consider the types described above: `binop, expr ` are
used to capture simple ML expressions. Each expression is either an integer
constant, a variable, or a binary operator applied to two sub-expressions.
A value is an integer, and an environment
is a list of pairs of variable names and values.
Use `listAssoc ` to write a function
` lookup: string * env -> value ` that finds the most recent
binding for a variable (i.e. the first from the left) in the list representing the
environment.
Using this function, write a function ` eval : env * expr -> value
` that when called with the pair `(evn,e)` evaluates an
ML-nano expression ` e ` of the above type, in the environment
` evn `, and raises an exception ` MLFailure ("variable not bound:
x")` if the expression contains an unbound variable.

`./nanoml.top` prompt:

# open Nano;;

# let evn =[("z1",Int 0);("x",Int 1);("y",Int 2);("z",Int 3);("z1",Int 4)];;

val evn : (string * Nano.value) list = [("z1", Int 0); ("x", Int 1); ("y", Int 2); ("z", Int 3); ("z1", Int 4)]

# let e1 =Bin(Bin(Var "x",Plus,Var "y"), Minus, Bin(Var "z",Plus,Var "z1"));;

val e1 : Nano.expr = Bin (Bin (Var "x", Plus, Var "y"), Minus, Bin (Var "z", Plus, Var "z1"))

# eval (evn,e1);;

- : Nano.value = Int 0

# eval (evn,Var "p");;

Exception: Nano.MLFailure "Variable not bound: p".

```
``` type binop = Plus | Minus | Mul | Div
| Eq | Ne | Lt | Le | And | Or
type expr = Const of int
| True | False
| Var of string
| Bin of expr * binop * expr
| If of expr * expr * expr
type value = Int of int
| Bool of bool
type env = (string * value) list

Add support for the binary operators `=`, `!=`, `<`, `<=`, `&&`, `||`. This will require using the new value type `Bool`. The operators `=` and `!=` should work if both operands are `Int` values, or if both operands are `Bool` values. The operators `<` and `<=` are only defined for `Int` arguments, and `&&` and `||` are only defined for `Bool`arguments. For all other arguments, a MLFailure exception should be raised with an appropriate error message.

Now implement `If` expressions. Given `If(p,t,f)`, `p` should be evaluated first, and if it evaluates to true (as a `Bool`), then `t` should be evaluated, and the value of the if expression should be the value of `t`. Similarly, if `p` evaluates to false, then `f` should be evaluated and the result returned. If `p` does not evaluate to a `Bool`, a MLFailure exception should be raised with an appropriate error message.

`./nanoml.top` prompt:

# open Nano;;

# let evn =[("z1",Int 0);("x",Int 1);("y",Int 2);("z",Int 3);("z1",Int 4)];;

val evn : (string * Nano.value) list = [("z1", Int 0); ("x", Int 1); ("y", Int 2); ("z", Int 3); ("z1", Int 4)]

# let e1 =If(Bin(Var "z1",Lt,Var "x"),Bin(Var "y",Ne,Var "z"),False);;

val e1 : Nano.expr = If (Bin (Var "z1", Lt, Var "x"), Bin (Var "y", Ne, Var "z"), False)

# eval (evn,e1);;

- : Nano.value = Bool true

# let e2 =If(Bin(Var "z1",Eq,Var "x"),Bin(Var "y",Le,Var "z"),Bin(Var "z",Le,Var "y"));;

val e2 : Nano.expr = If (Bin (Var "z1", Eq, Var "x"), Bin (Var "y", Le, Var "z"), Bin (Var "z", Le, Var "y")) # eval (evn,e2);;

- : Nano.value = Bool false

```
``` type expr = ...
| Let of string * expr * expr
| Letrec of string * expr * expr

Now consider the extended the types as shown above to include "let-in"
expressions that introduce local bindings exactly as in OCaml. ` Let (b,e1,e2) ` should be
evaluated as the ML expression ` let b = e1 in e2 `. Similarly, ` Letrec (b,e1,e2) `should be
evaluated as ` let rec b = e1 in e2 `. (Since at this point, we do not support functions, Let and Letrec should do the same thing.)

`./nanoml.top` prompt:

# open Nano;;

# let e1 = Bin(Var "x",Plus,Var "y");;

val e1 : Nano.expr = Bin (Var "x", Plus, Var "y")

# let e2 = Let("x",Const 1,Let("y",Const 2,e1));;

val e2 : Nano.expr = Let ("x", Const 1, Let ("y", Const 2, Bin (Var "x", Plus, Var "y")))

# eval ([],e2);;

- : Nano.value = Int 3

# let e3 = Let("x",Const 1,Let("y",Const 2,Let("z",e1,Let("x",Bin(Var "x",Plus,Var "z"),e1))));;

val e3 : Nano.expr = Let ("x", Const 1, Let ("y", Const 2, Let ("z", Bin (Var "x", Plus, Var "y"), Let ("x", Bin (Var "x", Plus, Var "z"), Bin (Var "x", Plus, Var "y")))))

# eval ([],e3);;

- : Nano.value = Int 6

```
``` type expr = ...
| App of expr * expr
| Fun of string * expr
type value = ...
| Closure of env * string option * string * expr

We now extend the above types so that there is an expression for function
application: `./nanoml.top` prompt:

# open Nano;;

# eval ([],Fun ("x",Bin(Var "x",Plus,Var "x")));;

- : Nano.value = Closure ([], None, "x", Bin (Var "x", Plus, Var "x"))

# eval ([],App(Fun ("x",Bin(Var "x",Plus,Var "x")),Const 3));;

- : Nano.value = Int 6

# let e3=Let("h",Fun("y",Bin(Var "x", Plus, Var "y")),App(Var "f",Var "h"));;

val e3 : Nano.expr = Let ("h", Fun ("y", Bin (Var "x", Plus, Var "y")), App (Var "f", Var "h"))

# let e2 = Let("x",Const 100,e3);;

val e2 : Nano.expr = Let ("x", Const 100, Let ("h", Fun ("y", Bin (Var "x", Plus, Var "y")), App (Var "f", Var "h")))

# let e1 = Let("f",Fun("g",Let("x",Const 0,App(Var "g",Const 2))),e2);;

val e1 : Nano.expr =

Let ("f", Fun ("g", Let ("x", Const 0, App (Var "g", Const 2))),

Let ("x", Const 100,

Let ("h", Fun ("y", Bin (Var "x", Plus, Var "y")),

App (Var "f", Var "h"))))

# eval ([],e1);;

- : Nano.value = Int 102

# eval ([],Letrec("f",Fun("x",Const 0),Var "f"));;

- : Nano.value = Closure ([], Some "f", "x", Const 0)

Make the above work for recursively defined functions (when declared with `let rec`).

`./nanoml.top` prompt:

# open Nano;;

# eval ([],Letrec("fac",Fun("n",If(Bin(Var "n",Eq,Const 0),Const 1,Bin(Var "n",Mul,App(Var "fac",Bin(Var "n",Minus,Const 1))))),App(Var "fac",Const 10)));;

- : Nano.value = Int 3628800

```
``` type binop = ...
| Cons
type expr = ...
| NilExpr
type value = ...
| Nil
| Pair of value * value

Extend your program to support operations on lists. In addition to the changes to the data types, add support for two functions "hd" and "tl" which do what the corresponding ML functions do.

`./nanoml.top` prompt:

# open Nano;;

# eval ([],Bin(Const 1,Cons,Bin(Const 2,Cons,NilExpr)));;

- : Nano.value = Pair (Int 1, Pair (Int 2, Nil))

# eval ([],App(Var "hd",Bin(Const 1,Cons,Bin(Const 2,Cons,NilExpr))));;

- : Nano.value = Int 1

# eval ([],App(Var "tl",Bin(Const 1,Cons,Bin(Const 2,Cons,NilExpr))));;

- : Nano.value = Pair (Int 2, Nil)

Once you have completed all the above parts, you should end up with an executable "nanoml.opt". You should be able to test it as follows from the shell prompt:

and so forth, for all the files in tests. To get the expected value for the other tests, run them with ocaml:

$ ./nanoml.byte tests/t1.ml

...

out: 45

$ ./nanoml.byte tests/t2.ml

...

out: 0

$ ./nanoml.byte tests/t3.ml

...

out: 2

and so forth. "tests/t14.ml" requires that you have completed both extra credit parts.

# #use "tests/t1.ml";;

- : int = 45