In this assignment, we will give you part of a working thread system. Your job is to complete it and then use it to solve several synchronization problems.
The first step is to read and understand the partial thread system we've provided. This thread system implements thread fork, thread completion, and semaphores for synchronization.
Properly synchronized code should work no matter what order the scheduler chooses to run the threads on the ready list. In other words, we should be able to put a call to Thread::Yield() (which causes the scheduler to pick another thread to run) anywhere in your code where interrupts are enabled without changing the correctness of your code. You will be asked to write properly synchronized code as part of later assignments, so understanding how to do this is crucial to being able to do the project.
To aid you in this task, code linked in with Nachos will cause Thread::Yield() to be called in a repeatable but unpredictable way. Nachos code is repeatable in that if you call it repeatedly with the same arguments, it will do exactly the same thing each time. However, if you invoke Nachos with "nachos -rs #" with a different number each time, calls to Thread::Yield() will be inserted in different places in the code.
Warning: In our implementation of threads, each thread is assigned a small, fixed-size execution stack. This may cause bizarre problems (such as segmentation faults at strange lines of code) if you declare large data structures to be automatic variables (e.g., ``int buf;''). You will probably not notice this during the term, but, if you do, you may change the size of the stack by modifying the StackSize #define in switch.h.
Although the solutions can be written as normal C routines, you will find organizing your code to be easier if you structure your code as C++ classes. Also, there should be no busy-waiting in any of your solutions to this assignment.
Don't worry if you don't have to write much code for each of these: the assignment is largely conceptual and not a programming chore. For some hints on getting started, here are some suggestions.
[10 pts] You should write your code "defensively" in the sense that you should make an attempt to detect error conditions and react appropriately. For error conditions that could result in a race condition or deadlock, your library routines should exit -- there is no way to recover from these errors, so they should be fatal to the program. There is a convenient macro ASSERT() that you can use to check for error conditions and abort if necessary (grep through the Nachos source code files for examples of how to use it).
To help motivate you to get into the habit of testing for error conditions, write test programs that test for the following errors: (1) acquiring the same Lock twice, (2) releasing a Lock that isn't held, (3) deleting a Lock that is held, (4) waiting on a condition variable without holding a Lock, (5) signalling a condition variable wakes only one thread and broadcasting wakes up all threads, (6) signalling and broadcasting to a condition variable with no waiters is a no-op, and future threads that wait will block (i.e., the signal/broadcast is "lost"). These are the minimal set of error conditions for which we'll test your Lock and Condition implementations.
You can implement the "Mailbox" class in synch.h and sync.cc, or in new files. If you create new files, be sure to update the dependency information in the Makefile; see Installing and Building Nachos from the Duke equivalent of this course for directions on how to do this.
[5 pts] Write test cases that demonstrate that your implementation of the Mailbox class is faithful to the semantics described above: a receiver will only return when a sender sends, and blocks otherwise (and vice-versa); only one receiver and sender synchronize at a time, even when there are multiple senders and receivers.
(executing as the parent thread) Thread *child = new Thread("child", 1); child->Fork(SomeProcedure, SomeArgument); ... child->Join(); // parent blocks until child terminates
To implement Join, start by adding a parameter to the thread constructor to indicate whether or not Join will be called on this thread, and then implement the new Join method. Use the following signatures for the updated constructor and Join method:
Thread(char* debugName, int join = 0); void Join();
Your implementation should properly delete the thread control block (1) whether or not Join is to be called, and (2) whether or not the thread being Joined finishes before the Join is called. For (1), if Join will not be called on the thread, you can delete the TCB immediately when the thread exits (as currently implemented). If Join will be called on the thread, you must wait until after Join has been called and returns before you can delete the TCB (you can assume that Join will eventually be called in this case). For (2), you do not know whether the thread to be Joined will finish before another thread calls Join on that thread -- i.e., the TCB for the child cannot be deleted even if the child terminates before the parent calls Join on it. If the child finishes before the parent calls Join, you must wait to delete the child's TCB until the parent calls Join.
The file join-example.cc is an example program where one thread calls Join() on another [Sample Output]. It should help make the semantics and use of Join more concrete.
[5 pts] Write test cases that test for the requirements outlined above for the semantics of the Join method. Be sure to test for both possibilites of each requirement.
void setPriority(int newPriority); int getPriority();
NOTE: You need to use these names (including capitalization) and obey these signatures so that our test programs will compile to your code.
The range of valid priorities is the entire range of an "int". Assume that all threads are created with priority 0. Roughly speaking, threads set to have a negative priority have "less priority", and threads set to have a positive priority have "more priority". Compare thread priorities directly to determine higher priority (e.g., a priority of 1 is lower than a priority of 2).
An issue with priority scheduling is "priority inversion". If a high priority thread needs to wait for a low priority thread, such as for a lock held by a low priority thread or for a Join to complete, and a middle priority thread is on the ready list, then the high priority thread will never get the CPU because the low priority thread will not get any CPU time. A partial fix for this problem is to have the waiting thread "donate" its priority to the low priority thread while it is holding the lock. Implement this fix separately for both situations: (1) the Lock class and (2) the Join method.
[10 pts] Write test programs that (1) demonstrate that threads with higher priority get service first in the cases outlined above (both when added to the ready list, and when woken up when waiting on a synchronization variable), and (2) demonstrate that you solve the priority inversion problem for Locks and Join().
All the code you write should be well commented so we can understand what you changed. However, your grade on the project fundamentally depends upon how well your solutions will pass the test cases. As a result, it is important that (1) your code compiles cleanly, (2) the nachos executable will run, and (3) you write test cases to test your solutions to the problems.
Turning in the project will be done via CVS. I know a lot of you have developed a great hatred for CVS in the past weeks, but let's try to put that aside for now. What you're going to do is the following:
Add a file named README to your CVS repository containing the members of your group, and a short paper write-up describing what changes you made, how well they worked, how you tested your changes, and how each group member contributed to the project. The idea of this is to make it easier to grade, not to burden you with a lot more work. Don't agonize over wording or anything, it doesn't have to be poetic, but should be informative. For an example writeup, see http://www-cse.ucsd.edu/classes/fa02/cse120/projects/example-writeup.html .
Put this file in the root of your copy of the cvs repository, and do:
cvs add README
Next, label the current version of the code in CVS as project1, this is important as this is how we get your files. To do this, type the following:
cvs rtag -F project1 .
The -F flag tells it to set the tag even if it's already been set. This will be useful if you need to make changes to what you turned in. Essentially any time you make a change that you want turned in, you'll have to re-label it.
If you've forgotten all the CVS commands, there is a quick and dirty reference for most of the commands you will need here.